The new Makita LS0815FL Slide Compound Mitre Saw has a features list ideally suited to first and second fix on-site carpentry operations. It features an integrated laser marker, LED job light and a maximum mitre range of 45-60°. With positive stops at 0, 15, 22.5, 31.6 and 45° which make mitre and repeat settings simple and quick.
Four steel bars with 6 linear ball bearings are used for smooth and precise sliding action. A soft start 1,400W motor provides the power which will run the blade up to 5,000rpm without load. The rigid, cast alloy base and twin parallel slides give a high level of accuracy with the blade at any angle. Saws with slides above each other as opposed to side by side as on the LS0815FL, prove to be inaccurate as the drive head has a tendency to tilt the slides into a curved track.
Twin material support bars are fitted either side of the base plate which also has a left side sub fence with a fixed fence on the right side. The stock clamping post can be fitted to either side. A soft grip handle is provided for ease of transportation. Weighing in at 14.2kg, it's relatively easy to move around the workshop or site. A sliding sub-fence is fitted on the left hand side as well as work supports on each side
Maximum cut capacity of 65 x 305mm
48 degree left and 5 degree right bevel capacity
50 degree left and 60 degree right mitre cuts
Two stage dual linear ball bearing rails for smooth accurate cutting
Laser marker for easy cut line alignment
Rating input: 1400W
Blade diameter: 216mm
Max cutting capacity:
45°: 65mm x 215mm
90°: 65mm x 305mm
Power cord: 2.5m
3 Years Warranty Covered By Makita Australia