Call us on +61 (03) 9347 4888

Lock Mortice Machine (INCLUDES BONUS CUTTER)

6005 Lock Mortising Machine 6005 Machine is fitted with a router shaft for router cutters with a ¼” UNF male threaded shank. Where as a 6006 Machine is fitted with a router shaft for router cutters with a ¼” UNF female threaded bore. These are designed for quick, accurate and dust free mortising of doors from 30mm - 80mm thick. 1¼” to 31⁄8”. The Makita 3612C electronic speed controlled motor allows for low speed operations and is capable of cutting through metal clad fire doors with special cutters at the lowest speed of 9,000 rpm. The lock mortising machine can be purchased as a separate item from the trolley. For more information follow the link www.chanthardware.co.nz/#/product/machines/lock-mortising-machine

Availability: In stock

$4,199.00

We will send this product in 2 days. Read more...

Call us now for more info about our products. +61 (03) 9347 4888

Details

Details

Chant Part No. 6005 Specifications: Mortising Machine 6005 Machine fitted with a router shaft for router cutters with a ¼” UNF male threaded shank. Metric sizes, refer to page 9. 6006 Machine fitted with a router shaft for router cutters with a ¼” UNF female threaded bore. Imperial sizes, refer to page 9. Designed for quick, accurate and dust free mortising of doors from 30mm - 80mm thick. 1¼” to 31⁄8” The Makita 3612C electronic speed controlled motor allows for low speed operations and is capable of cutting through metal clad fire doors with special cutters at the lowest speed of 9,000 rpm. Seek advice from Chant. Variable speed reduces the noise level while still maintaining optimum cutting efficiency. The machine is designed to be lifted by the lifting handle with the left hand, positioned on the door, and the clamp screws tightened with the right hand. Then operating the machine with the right hand on the crank handle. Self-centering door clamps with protective face pads. These are a generous length to avoid marking the door surface, and are machined with “toe-in” so that they grip at the tips first, then over their full length as the clamps tighten. Clamp adjustment left to right on the clamp centring block allows for the perfect parallel alignment of the machined recess with the door faces. Router shaft enclosed with telescopic sleeves for safety. Mortise cutter enclosed when on the door by the vacuum chamber. Shaving extraction system for operator safety, clean machine operation and work area. Mortise height adjustment: 40mm to 200mm (19⁄16” to 7 7⁄8”) Mortise depth adjustment: 125mm (5“) Clamps designed for door thickness: 30mm to 80mm (1¼” to 31⁄8”). Cutter diameters available: 16mm, 17mm, 18mm,19mm, 20mm, 22mm, 25mm with ¼” UNF threaded shaft to screw into the end of the router shaft. It requires the router shaft to have a ¼” UNF threaded stud protruding for the cutter to screw into. Refer to Mortise Shafts, Cutters and Accesssories, page 8 for additional details. Weight: 13.4kg (30 lbs.) The lock mortising machine can be purchased as a separate item from the trolley.

Additional Info

Additional Info

SKU Chant 6005
Manufacturer Chant